• Zwanghaft Straitjackets are made in black shiny .030" or .040" thick black latex;
• The .040 - .045" " offers a great sensation of weight and restriction as well as extra durability;
• The .030" offers a little more stretch;
• The zipper is heavy duty nylon; We use Polymorphe latex sheeting so that we can have extra black shiny finish inside and out. Now UV protected as well as resists oxidizing;
• latex is reinforced with sewn and glued seams with reinforced latex material.
• straps are sewn and reinforced latex or Biothane depending on the model selected.
• Other colours are available.
• Straitjacket shirts are made in .024 latex material;
• Care and Cleaning Notes Latex material requires special care and maintenance, especially the straitjacket. Be sure to hand wash in mild soap and cool or warm water after each use. Perspiration left on the straitjacket will deteriorate the latex. Hang to dry for at least 24 hours, then use a water based silicone treatment or unscented powder to protect the latex. Store in a protective air tight bag away from heat. If stored in open air be sure to silicone the surfaces monthly to protect from oxidization which may dull the surfaces permanently.
• (Thicknesses quoted are average with tolerances typically + or - .005")

Latex is air tight, acquire the knowledge needed to avoid risks of injury or suffocation. When in use ensure that the airway cannot become blocked or obstructed at any time under any situation. Check with your physician if you need information regarding allergies to silicone or latex products

Your link to more information on the

LSJP3 - Zwanghaft  1" locking buckles and belts

Your link to more information on the

The Latex Straitjacket Shirt.

LSJ4 - Latex Straitjacket Shirt, and

LSJ5 - Latex Straitjacket Shirt  with Hood